Pipe ring MP-PI
 |
 |
|
Applications
■ Fresh water distribution pipes■ Waste water distribution pipes ■ Heating and gas distribution pipes Advantages
■ Securely fixed rubber inlay – no dropping out■ High-quality product with third-party approvals ■ Installation with two threaded rods possible for sizes 8 inch and above to achieve higher loads |
|
Technical data
|
|
| Material composition: | SPCC-SD FB - Q/BQB402, DC01 – EN 10130 |
| Surface finish: | Galvanized |
| Temperature resistance: | -40 - 110 °C |
| Hardness insulation material: | 75° ±5° Shore A |
| Noise reduction : | 16 dB (A) |
| Approvals: | Acustic insulaton DIN 4109 inspected, Fire Class E |
| Additional product information : | The maximum load of 5000 N in accordance with RAL-GZ 655-B can be achieved if pipe rings 8 inches in diameter and larger are fastened with two threaded rods |
| Insulation material: | EPDM |
 |
| Ordering designation | Clamping range - D |
Nominal pipe size (imperial) |
Width - B | Cross section width and thickness (b x s) |
Item number |
| MP-PI 11-15 1/4” M8 | 11 - 15 mm | 1/4 in | 54 mm | 20 x 1.2 mm | 2073431 |
| MP-PI 16-20 3/8” M8 | 16 - 20 mm | 3/8 in | 58 mm | 20 x 1.2 mm | 2073432 |
| MP-PI 20-24 1/2” M8 | 20 - 24 mm | 1/2 in | 62 mm | 20 x 1.2 mm | 2073433 |
| Ordering designation | Distance centre pipe to top - h |
Maximum load - F |
Distance between holes - A |
Sales pack quantity | Item number |
| MP-PI 11-15 1/4” M8 | 22 mm | 750 N | 39 mm | 150 pc | 2073431 |
| MP-PI 16-20 3/8” M8 | 24 mm | 750 N | 42 mm | 150 pc | 2073432 |
| MP-PI 20-24 1/2” M8 | 26 mm | 750 N | 47 mm | 150 pc | 2073433 |
| Further sizes are also available, please contact us |
