HSA
Base materials
■ Concrete (cracked)

Applications
■ Fastening facade brackets
■ Fastening columns and beams
■ Fastening brackets and channels

Advantages
■ High loads due to concrete cone failure
■ 3 embedment depths for maximum flexibility
■ Excellent edge and spacing distances
■ Suitable for pre- and through-fastening
Approvals
ETA: ETA 11/0374 for HSA stud anchor (ETAG 001-02, Option 7)
Approvals and test reports may apply to selected products only. Please refer to the documents for details.
Standard stud anchor HSA
Technical data
Head configuration: Externally threaded
Environmental conditions: Indoor, dry conditions
Type of fastening: Pre-fastening, Through-fastening
Material composition: Steel, zinc-plated (min. 5 μm)
Installation direction: All
Tested/approved for diamond drilling: Yes

Ordering designation Anchor size Anchor length Base plate clearance hole Required tightening torque Item number
HSA M6x50 5/-/- M6 50 mm 7 mm 5 Nm 2036084
HSA M6x65 20/10/- M6 65 mm 7 mm 5 Nm 2036085
HSA M6 x 85 40/30/10 M6 85 mm 7 mm 5 Nm 2036086

Ordering designation Socket size Wrench size Thread length Sales pack quantity Item number
HSA M6x50 5/-/- 10 mm 10 mm 15 mm 200 pc 2036084
HSA M6x65 20/10/- 10 mm 10 mm 30 mm 200 pc 2036085
HSA M6 x 85 40/30/10 10 mm 10 mm 50 mm 100 pc 2036086
Further sizes are also available, please contact us
Stud anchor with large washer HSA-BW
Technical data
Base materials: Concrete (uncracked)
Head configuration: Externally threaded
Environmental conditions: Indoor, dry conditions
Type of fastening: Pre-fastening, Through-fastening
Material composition: Steel, zinc-plated (min. 5 μm)
Installation direction: All
Tested/approved for diamond drilling: Yes

Ordering designation Anchor size Anchor length Base plate clearance hole Required tightening torque Item number
HSA M8x55 5/-/- BW M8 55 mm 9 mm 15 Nm 2004223
HSA M8x70 20/10/- BW M8 70 mm 9 mm 15 Nm 2004224
HSA M10x68 5/-/- BW M10 68 mm 12 mm 30 Nm 2004225

Ordering designation Wrench/nut size Socket size Wrench size Sales pack quantity Item number
HSA M8x55 5/-/- BW 13 mm 13 mm 13 mm 100 pc 2004223
HSA M8x70 20/10/- BW 13 mm 13 mm 13 mm 100 pc 2004224
HSA M10x68 5/-/- BW 17 mm 17 mm 17 mm 25 pc 2004225
Further sizes are also available, please contact us
Standard hot-dip galvanized stud anchor HSA-F
Technical data
Base materials: Concrete (uncracked)
Head configuration: Externally threaded
Environmental conditions: Indoor, damp conditions
Type of fastening: Pre-fastening, Through-fastening
Material composition: Steel, hot-dip galvanized (min. 35 μm)
Installation direction: All
Tested/approved for diamond drilling: Yes

Ordering designation Anchor size Anchor length Base plate clearance hole Required tightening torque Item number
HSA-F M6x50 5/-/- M6 50 mm 7 mm 5 Nm 2036310
HSA-F M6x65 20/10/- M6 65 mm 7 mm 5 Nm 2036311
HSA-F M8x55 5/-/- M8 55 mm 9 mm 15 Nm 2004113

Ordering designation Socket size Thread length Length id mark Sales pack quantity Item number
  10 mm 15 mm z 200 pc 2036310
  10 mm 30 mm w 200 pc 2036311
  13 mm 14 mm z 100 pc 2004113
Further sizes are also available, please contact us
Standard stud anchor HSA-R2
Technical data
Base materials: Concrete (uncracked)
Head configuration: Externally threaded
Environmental conditions: Outdoor
Type of fastening: Pre-fastening, Through-fastening
Material composition: Steel, A2 (SS 304)
Installation direction: All
Tested/approved for diamond drilling: Yes

Ordering designation Anchor size Anchor length Base plate clearance hole Required tightening torque Item number
HSA-R2 M8x70 20/10/- M8 70 mm 9 mm 15 Nm 2004218
HSA-R2 M10x83 20/10/- M10 83 mm 12 mm 25 Nm 2004219
HSA-R2 M12x100 20/5/- M12 100 mm 14 mm 50 Nm 2004220

Ordering designation Socket size Wrench size Fastening thickness at embed.1 Sales pack quantity Item number
  13 mm 13 mm 20 mm 100 pc 2004218
  17 mm 17 mm 20 mm 50 pc 2004219
  19 mm 19 mm 20 mm 25 pc 2004220
Further sizes are also available, please contact us
Standard stud anchor HSA-R
Technical data
Base materials: Concrete (uncracked)
Head configuration: Externally threaded
Environmental conditions: Outdoor
Type of fastening: Pre-fastening, Through-fastening
Material composition: Steel, A4 (SS316)
Installation direction: All
Tested/approved for diamond drilling: Yes

Ordering designation Anchor size Anchor length Base plate clearance hole Required tightening torque Item number
HSA-R M6x50 5/-/- M6 50 mm 7 mm 5 Nm 2036314
HSA-R M6x65 20/10/- M6 65 mm 7 mm 5 Nm 2036315
HSA-R M6x85 40/30/10 M6 85 mm 7 mm 5 Nm 2036316

Ordering designation Socket size Wrench size Thread length Sales pack quantity Item number
HSA-R M6x50 5/-/- 10 mm 10 mm 15 mm 200 pc 2036314
HSA-R M6x65 20/10/- 10 mm 10 mm 30 mm 200 pc 2036315
HSA-R M6x85 40/30/10 10 mm 10 mm 50 mm 100 pc 2036316
Further sizes are also available, please contact us