Base Materials
■ Concrete (cracked)■ Concrete (uncracked) ■ Masonry (solid) Applications ■ Suitable for fastenings in concrete in combination with the relevant Hilti HIT injectable adhesive mortar ■ Suitable for fastenings in masonry in combination with Hilti HITHY 70 ■ For applications where embedment depth is between 4x - 20x rod diameter Advantages
■ Flexibility: approved embedment depth between 4 to 20 times rod diameter allows shallow fastenings in thin concrete slabs or walls■ Productivity: use of optimal rod length and diameter saves time and money with every fastening ■ Universality: simplifies your anchor rod inventory by allowing use of the same rod for various applications ■ Approvals: system approved worldwide (ETA) for flexible embedment depth from 4 to 20 times rod diameter for M8 to M30 rods ■ Head marking: allows post-installation check for correct anchor setting - the head marking shows the rod length and steel grade |
|||||||||||||||
|
|||||||||||||||
Anchor rod (5.8 carbon steel) HIT-V-5.8
|
|||||||||||||||
|
|||||||||||||||
Ordering designation | Anchor size | Base plate clearance hole | Wrench size | Anchor length | Item number |
HIT-V-5.8 M6x75 | M6 | 7 mm | 10 mm | 75 mm | 387144 |
HIT-V-5.8 M6x105 | M6 | 7 mm | 10 mm | 105 mm | 387145 |
HIT-V-5.8 M8x80 | M8 | 9 mm | 13 mm | 80 mm | 387054 |
HIT-V-5.8 M8x110 | M8 | 9 mm | 13 mm | 110 mm | 387055 |
HIT-V-5.8 M10x95 | M10 | 12 mm | 17 mm | 95 mm | 387057 |
Ordering designation | Useable thread length | Standard embedment depth | Drilling depth | Sales pack quantity | Item number |
HIT-V-5.8 M6x75 | 63 mm | 70 mm | 60 mm | 20 pc | 387144 |
HIT-V-5.8 M6x105 | 93 mm | 70 mm | 80 mm | 20 pc | 387145 |
HIT-V-5.8 M8x80 | 65 mm | 80 mm | 60 mm | 20 pc | 387054 |
HIT-V-5.8 M8x110 | 95 mm | 80 mm | 80 mm | 20 pc | 387055 |
HIT-V-5.8 M10x95 | 78 mm | 90 mm | 90 mm | 10 pc | 387057 |
Further sizes are also available, please contact us |
Anchor rod (5.8 hot-dip galvanized) HIT-V-F (5.8 hot-dip galvanized)
|
||||||||||||||||
|
Ordering designation | Anchor size | Base plate clearance hole | Wrench size | Anchor length | Useable thread length | Sales pack quantity | Item number |
HIT-V-F-5.8 M8x110 | M8 | 9 mm | 13 mm | 110 mm | 95 mm | 20 pc | 409549 |
HIT-V-F M10x95 | M10 | 12 mm | 17 mm | 95 mm | 78 mm | 10 pc | 409551 |
HIT-V-F M10x115 | M10 | 12 mm | 17 mm | 115 mm | 98 mm | 10 pc | 409552 |
HIT-V-F M10x130 | M10 | 12 mm | 17 mm | 130 mm | 113 mm | 10 pc | 409553 |
HIT-V-F M12x110 | M12 | 14 mm | 19 mm | 110 mm | 91 mm | 10 pc | 409555 |
Further sizes are also available, please contact us |
Anchor rod (A4 stainless steel) HIT-V-R
|
||||||||||||||||
|
Ordering designation | Anchor size | Base plate clearance hole | Required tightening torque | Wrench size | Item number |
HIT-V-R M8x80 | M8 | 9 mm | 10 Nm | 13 mm | 387074 |
HIT-V-R M8x110 | M8 | 9 mm | 10 Nm | 13 mm | 387075 |
HIT-V-R M8x150 | M8 | 9 mm | 10 Nm | 13 mm | 387076 |
HIT-V-R M10x95 | M10 | 12 mm | 20 Nm | 17 mm | 387077 |
HIT-V-R M10x130 | M10 | 12 mm | 20 Nm | 17 mm | 387078 |
Ordering designation | Anchor length | Useable thread length | Drilling depth | Sales pack quantity | Item number |
HIT-V-R M8x80 | 80 mm | 65 mm | 60 mm | 20 pc | 387074 |
HIT-V-R M8x110 | 110 mm | 95 mm | 80 mm | 20 pc | 387075 |
HIT-V-R M8x150 | 150 mm | 135 mm | 80 mm | 20 pc | 387076 |
HIT-V-R M10x95 | 95 mm | 78 mm | 90 mm | 10 pc | 387077 |
HIT-V-R M10x130 | 130 mm | 113 mm | 90 mm | 10 pc | 387078 |
Further sizes are also available, please contact us |