Applications
■ Rebar applications: structural connections (e.g. walls, slabs, stairs), structural repair, design corrections, bridge extensions, road widening, refurbishment / retrofitting■ Anchoring applications: structural steel (e.g. columns, beams), railings (e.g. balconies, hand rails), facade work / curtain walling, sound and crash barriers
Advantages
■ Meets high health and safety requirements: Non-hazardous and odourless■ Easy waste management: carries no hazard symbols, thus easily disposed of (in cured or uncured state) in standard Green DOT waste containers, avoiding costs for special waste handling on jobsites
■ Contains no styrene or plasticizers
■ Approved by NSF for use in potable water
■ One of the strongest, fast-curing injectable adhesive mortars available for applications in concrete where approval is relevant
■ Complies in full with green building standards
|
Technical data
|
|
| Base material: | Concrete (uncracked) |
| Base material condition: | Dry, Wet |
| Environmental conditions: | Highly corrosive special applications, Indoor, damp conditions, Indoor, dry conditions, Outdoor |
| Type of fastening: | Pre-fastening, Through-fastening |
| Cleaning procedures: | Auto-cleaning with Hilti hollow drill bits, Compressed-air cleaning, Manual cleaning |
| Material composition: | Hybrid urethane methacrylate adhesive |
| Installation direction: | All |
|
Approvals
|
|
| ETA | ETA 11/0354 for HIT-CT 1 injection mortar for anchoring applications (ETAG 001-05, Option 7) |
| ETA, Seismic | ETA 11/0390 for HIT-CT 1 injection mortar for rebar (ETAG 001-05, Option -) |
Approvals and test reports may apply to selected products only. Please refer to the documents for details. |
|