HAS-TZ
Applications
■ Suitable for fastenings in cracked concrete in combination with Hilti HVU-TZ capsules
Advantages
■ HVZ combines highest performance in chemical anchors with an unparalleled level of safety
■ Minimal sensitivity to cracked concrete (tension zone)
■ Minimal sensitivity to dynamic loads
■ Minimal sensitivity to application irregularities
■ Short spacing and edge distances

Approvals
ETA ETA 03/0032 for HVZ adhesive anchor system (ETAG 001-05, Option 1)
Approvals and test reports may apply to selected products only. Please refer to the documents for details.
Technical data
Base materials: Concrete (cracked, uncracked)
Anchor type: Off-the-shelf rods
Head configuration: Externally threaded
Environmental conditions: Indoor, dry conditions
Type of fastening: Pre-fastening, Through-fastening
Material composition: Steel, 8.8 grade, zinc-plated (min. 5 μm)
Installation direction: All
 
Ordering designation Anchor size Base plate clearance hole Required tightening torque Wrench size Item number
HAS-TZ M10X75/30 M10 12 mm 20 Nm 17 mm 308383
HAS-TZ M10X75/50 M10 12 mm 20 Nm 17 mm 308384
HAS-TZ M10X75/15 M10 12 mm 20 Nm 17 mm 310018
HAS-TZ M12X95/25 M12 14 mm 40 Nm 19 mm 308385
HAS-TZ M12X95/50 M12 14 mm 40 Nm 19 mm 308386

Ordering designation Anchor length Standard embedment depth Max. fixture thickness at standard embedment depth Sales pack quantity Item number
HAS-TZ M10X75/30 139 mm 75 mm 30 mm 10 pc 308383
HAS-TZ M10X75/50 159 mm 75 mm 50 mm 10 pc 308384
HAS-TZ M10X75/15 124 mm 75 mm 15 mm 10 pc 310018
HAS-TZ M12X95/25 158 mm 95 mm 25 mm 10 pc 308385
HAS-TZ M12X95/50 183 mm 95 mm 50 mm 10 pc 308386
Further sizes are also available, please contact us


Anchor rod (A4 stainless steel) HAS-RTZ
Technical data
Base materials: Concrete (cracked, uncracked)
Anchor type: Off-the-shelf rods
Head configuration: Externally threaded
Environmental conditions: Covered by ground soil, Outdoor, Underwater, fresh water
Type of fastening: Pre-fastening
Material composition: Steel, A4 (SS316)
Installation direction: All
 
Ordering designation Anchor size Baseplate clearance hole Required tightening torque Wrench size Item number
HAS-RTZ M10X75/30 M10 12 mm 20 Nm 17 mm 308391
HAS-RTZ M10X75/15 M10 12 mm 20 Nm 17 mm 310019
HAS-RTZ M12X95/25 M10 14 mm 40 Nm 19 mm 308393
HAS-RTZ M12X95/50 M12 14 mm 40 Nm 19 mm 308394
HAS-RTZ M12X95/100 M12 14 mm 40 Nm 19 mm 308395

Ordering designation Anchor length Standard embedment depth Max. fixture thickness at standard embedment depth Sales pack quantity Item number
HAS-RTZ M10X75/30 139 mm 75 mm 30 mm 10 pc 308391
HAS-RTZ M10X75/15 124 mm 75 mm 15 mm 10 pc 310019
HAS-RTZ M12X95/25 158 mm 95 mm 25 mm 10 pc 308393
HAS-RTZ M12X95/50 183 mm 95 mm 50 mm 10 pc 308394
HAS-RTZ M12X95/100 233 mm 95 mm 100 mm 10 pc 308395
Further sizes are also available, please contact us