Injectable mortar Hilti HIT-RE 500
Applications
■ Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)
■ Anchoring structural steel connections (e.g. steel columns, beams, etc.)
■ Anchoring secondary steel structures (e.g. balustrades, steel ledgers, etc.)
■ Anchoring crash barriers, noise barriers, etc.
■ Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible
■ Substitution of misplaced/missing rebars or couplers

Advantages
■ High performance and technical superiority as per international approvals
■ Especially suitable for large-diameter elements and/or deep embedment depths
■ Unique foil packaging and compatible Hilti HIT injection system make handling extremely easy and minimize packaging disposal costs
■ European Technical Approval covering automatic cleaning of holes drilled using TE-CD or TE-YD drill bits and Hilti vacuum cleaners
■ No expansion forces in concrete allow secure fastenings even close to edges and/or with close spacing
■ Virtually odourless, hence pleasant to work with
Technical data
Base material: Concrete (uncracked)
Base material condition: Dry, Submerged, Water-filled, Wet
Environmental conditions: Highly corrosive special applications, Indoor, damp conditions, Indoor, dry conditions, Indoor, ventilated facades, Outdoor, Underwater, fresh water
Type of fastening: Pre-fastening, Through-fastening
Cleaning procedures: Compressed-air cleaning, Manual cleaning
Material composition: Epoxy adhesive
Installation direction: All
Approvals
ETA ETA 04/0027 for HIT-RE 500 injection mortar for anchoring applications (ETAG 001-05, Option 7)
Approvals and test reports may apply to selected products only. Please refer to the documents for details.