Applications
■ Drilling holes for metal and plastic anchorsAdvantages
■ 2 cutting edges with direct helix transition for faster and more constant drilling progress■ Optimized tip geometry and rugged helix transition for longer lifetime
■ Wide helix spine for good dust transportation and extended lifetime
|
Technical data
|
|
| Base material: | Concrete, Brick, Masonry, Some types of natural stone |
| Tool type: | All tools with TE-C (SDS-plus) chuck |
| Working mode: | Hammer drilling, Drilling only |
|
|
|||||||
| Ordering designation | Diameter | Length | Working length | 1 Pc | 8 pc | 16 pc | 32 pc |
| TE-C 4/11 | 4 mm | 110 mm | 50 mm | 2037050 | 2021990 | 2022022 | 2022041 |
| TE-C 5/11 | 5 mm | 110 mm | 50 mm | 2037053 | - | - | 2037118 |
| TE-C 5/16 | 5 mm | 160 mm | 100 mm | 2037054 | 2037084 | - | - |
| TE-C 6/11 | 6 mm | 110 mm | 50 mm | 2037056 | - | - | 2037119 |
| TE-C 6/16 | 6 mm | 160 mm | 100 mm | 2037057 | 2037086 | 2037109 | 2037120 |
| TE-C 6/21 | 6 mm | 210 mm | 150 mm | 2037058 | 2037087 | - | - |
| TE-C 6/31 | 6 mm | 310 mm | 250 mm | 2037059 | - | - | - |
| Further sizes are also available, please contact us | |||||||