Combihammer TE 70-ATC/AVR
   
Applications
■ Hammer drilling in concrete, masonry and natural stone with drill bits 12 - 150 mm in diameter
■ Drilling holes for heavy-duty anchors from 20 - 40 mm in diameter
■ Breaching and demolition with pointed and flat chisels
■ Drilling with high torque in wood and steel
■ Hammer drilling in concrete, masonry and natural stone with drill bits 1/2” - 6” in diameter
■ Drilling holes for heavy-duty anchors from 3/4” - 1-3/4” in diameter
Advantages
■ High rotation speed (360 rpm) for maximum drilling performance
■ Optimized mechanical clutch for maximum torque transfer
■ Centre of gravity close to the grip for optimum balance
■ The unique Active Torque Control (ATC) stops the motor almost instantly if the bit binds and the housing begins to rotate too quickly, reducing the potential of sudden rotation of the combihammer about its own axis
■ Glass-fibre reinforced housing parts for ruggedness and long life
■ Maximum user comfort thanks to low contact pressure and Active Vibration Reduction (AVR) system for low vibration
Technical data
Rated input power: 1800 W
Dust removal module: TE DRS-Y (optional)
Rotation speed gear 1 under no load: 360 rpm
Single impact energy: 11.5 J
Weight according to EPTA Procedure 01/2003: 9.5 kg
Full hammering frequency: 2760 impacts/minute
Working mode: Hammer drilling, Drilling only, Chiselling, Chisel setting
Chiselling function: Yes
Chiselling intensity: No chiselling, Corrective chiselling in masonry / brick, Corrective chiselling in concrete, Penetrations / openings in concrete
Service indicator: Yes